CALL US FOR THE PRICE NI USB 6001-8 AI (14-Bit, 20 kS/s), 2 AO (5 kS/s/ch), 13 DIO USB 1‑Slo
NI 9381-8 AI, 8 AO, 4 DIO, 0 V to 5 V, C Series Multifunction I/O Module
cDAQ 9171-1‑Slot, USB CompactDAQ Chassis
±10 V, 250 kS/s, 16-Bit, 32-Channel C Series Voltage Input Module
16 isolated DI and 16 isolated DO channels High voltage isolation on all channels (2500 VDC) High sink current on isolated output channels (200 mA/Channels)
USB DAQ device with 4 dedicated high-voltage analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.
8-Slot, Zynq-7020 FPGA, EtherCAT CompactRIO Chassis
16 AI (16-Bit, 250 kS/s), 4 DI, 4 DO USB Multifunction I/O Device
Call us for the price This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. What's more, the USB TO RS232/485/TTL comes with an aluminium alloy enclosure, make it solid and durable to work.
16 AI (16-Bit, 400 kS/s), 2 AO (250 kS/s), Up to 32 DIO USB Multifunction I/O Device—The USB‑6212 is a multifunction DAQ device. It offers analog input, digital input, digital output, and two 32‑bit counters. The device provides an onboard amplifier designed for fast settling times at high scanning rates. It also features signal streaming technology that gives you DMA-like bidirectional high-speed streaming of data across USB. The device is ideal for test, control, and design applications including portable data logging, field monitoring, embedded OEM, in-vehicle data acquisition, and academic. The USB‑6212 features a lightweight mechanical enclosure and is bus powered for easy portability. The included NI‑DAQmx driver and configuration utility simplify configuration and measurements.
5 V/TTL, 32 Bidirectional Channels, 7 µs C Series Digital Module—The NI‑9403 is a configurable digital I/O interface for input or output with shift‑on‑the‑fly capabilities. Each channel features transient isolation between the I/O channels and the backplane. With reconfigurable I/O (RIO) technology (CompactRIO only), you can use the LabVIEW FPGA Module to program the NI‑9403 for applications such as custom, high-speed counter/timers; digital communication protocols; and pulse generation. In a CompactDAQ chassis, you can use the NI‑9403 only as a static (software-timed) digital I/O module. You cannot use these modules to route timing or triggering signals
Software USRP Hardware Driver 3.9.2 (or later) GNU Radio W/ GPS Unlocked TCXO Reference: ±75 ppb W/ GPS Locked TCXO Reference: <1 ppb Xilinx Spartan-6 XC6SLX150 FPGA Fully coherent 2 x 2 MIMO capability Channels: 2 TX and 2 RX, half or full-duplex Frequency range: 70 MHz to 6 GHz DC input: 6 V (DC power supply included)
24 V, 8-Channel (Sourcing Output), 100 µs C Series Digital Module—The NI‑9472 works with industrial logic levels and signals to connect directly to a wide array of industrial switches, transducers, and devices. Each channel is compatible with signals from 6 V to 30 V, features transient overvoltage protection between the output channels and the backplane, and has an LED that indicates the status.
4‑Slot, USB CompactDAQ Chassis—The cDAQ‑9174 is a CompactDAQ USB chassis designed for small, portable sensor measurement systems. The chassis provides the plug‑and‑play simplicity of USB to sensor and electrical measurements. It also controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The cDAQ‑9174 also has four 32‑bit general-purpose counters/timers.
The PS-15 can power your CompactDAQ and CompactRIO systems, CompactRIO Single-Board Controllers, Smart Cameras, touch panel computers (TPCs), and more. This Industrial Power Supply includes DIN rail mounting and toolless spring-clamp terminals for field connectivity. The PS-15 features 120 W output power with an operating temperature between -25 °C and +60 °C. To support region-specific requirements for Power Cables, the PS-15 features a 100 VAC to 240 VAC input. Additionally, this Industrial Power Supply supports power reserves of 20 percent for fluctuating loads, and you can use this extra current continuously for ambient temperatures under 45 °C.
200 kS/s, ±20 mA, 8-Channel C Series Current Input Module
